New Slip Resistant and Surface Burning Classifications for AlumiGraphics

FloorSignage, LLC, manufacturer of AlumiGraphics product line, has recently received two new classifications for both slip resistance and surface burning.
First, United Laboratories has certified that AlumiGraphics Grip complies with the applicable requirements in the Standard for Slip Resistance of Floor Coating and Finishing Material, UL 410 Third Edition. This new certification supports other coefficient of friction accreditations AlumiGraphics Grip has received for both wet and dry environments including;
* ANSI A137.1
* ASTM D 2240-05 & ASTM F1677-005
* HB 198:2014.
* BS 7976-2 / UKSRG (United Kingdom)
* AS 4586:2013, appendix D (Australia)
More details on AlumiGraphics Grip can be found on the United Laboratories website under the file SA44491 and at www.AlumiGraphics.com.

Scott Wieclaw, President of FloorSignage, LLC states that “this new UL classification demonstrates the reliably stable condition AlumiGraphics Grip provides for outdoor applications on concrete, asphalt, brick, stairs and other rigid surfaces outdoors”. Wieclaw added that as AlumiGraphics Grip continues to be discovered by more installers and end users; both groups are surprised at how easy this material is to install to compared to other well known products in this category” and that “now they have the added assurance that AlumiGraphics Grip has more accreditations for slip resistance than other outdoor floor graphics”. Wieclaw summarized AlumiGraphics Grip as “safe, durable and reliable”.

In the ASTM E84 surface burning test, AlumiGraphics received an ‘A’ classification with a flame spread index (FSI) = 0 and a Smoke Developed Index (SDI) = 20. The purpose of this test method is to determine the relative burning behavior according to the standard ASTM E84-15b; the standard test method for Surface Burning Characteristics of Building Materials (NFPA 255, ANSI/UL 723 and UBC 8-1. Complete details of the test results can be found at www.AlumiGraphics.com.

FloorSignage, LLC has an ongoing commitment to develop innovative products that are safe and reliable in performance and use. AlumiGraphics Grip and AlumiGraphics Smooth are products that are proof to our long-term commitment to provide material that meets a market need and align with good product safety. FloorSignage Vice President, Micah Causey, describes “the combination of the new classifications and the list of previous qualifications demonstrate the commitment our company has to create revolutionary products and provide support to the industry and end users”.

ASTM International is a global standards development organization, whose standards are used and referenced all over the world. There are some 12,000 standards with members in over 100 countries.

UL is a global independent safety science company with more than a century of expertise innovating safety solutions from the public adoption of electricity to new breakthroughs in sustainability, renewable energy and nanotechnology. Dedicated to promoting safe living and working environments, UL helps safeguard people, products and places in important ways, facilitating trade and providing peace of mind.

FloorSignage, LLC is the manufacturer of AlumiGraphics and EnduraGraphics product lines. The company pioneers graphic and signage material solutions for applications where graphics fail or are not used due to challenges caused by environment or influence. These innovative products are used to transform non-utilized spaces into highly visible, mass marketing and communication platforms.

AlumiGraphics is the award winning foil-based, wide format print media for use on outdoor walkways and walls plus other rigid surfaces. Available in two finishes;
1) AlumiGraphics Grip features a white, textured, reflective, slip resistant surface ideal for exterior walkways including concrete, asphalt, brick, tile, terrazzo and other rigid surfaces.
2) AlumiGraphics Smooth features a white, non-glare, satin surface that easily conforms to rough or smooth walls including concrete, cinder block, brick, stucco, and metal beams.
* Widely compatible = solvent, eco-solvent, latex, and UV printers.
* One step production process = print direct to the surface, no need for overlaminate.
* Easy and quick application and removal = No heat source, no specialty installers.
* Reliable and durable adhesion outdoors = perfect for long or short-term applications.
* Environmentally friendly = dispose with aluminum recycling.